Chimney Removal and Replacement in Los Angeles: Earthquake Safety and Permits

Stucco chimney chase with a metal flue replacing a brick chimney on an older house

The Heaviest, Stiffest Part of an Older House Is Also the Part Most Likely to Fall

Brick chimneys on older Los Angeles houses were built as tall stacks of unreinforced masonry, attached to a wood-frame house that moves very differently in an earthquake. The house sways; the chimney doesn’t. The joint usually breaks near the roofline, and the top of the chimney falls onto the roof, the driveway, or the yard. After the 2014 South Napa earthquake, a FEMA recovery advisory called masonry chimneys in wood-frame houses “extremely vulnerable to earthquake shaking” and described repairing older unreinforced chimneys to modern standards as generally infeasible. Chimney removal, partial or complete, followed by a lightweight replacement, is the approach it recommends. YD Group designs that work and takes it through the permit.

Old brick chimney on a Craftsman bungalow with cracked mortar near the roofline

Why Brick Chimneys Fail in Earthquakes

An older chimney is heavy, has little or no reinforcing steel, and is often held to the house with nothing more than a few straps, if anything at all. Its mortar softens with age and with years of heat and weather. In strong shaking, the part above the roofline acts like an inverted pendulum, cracks at its weakest joint, and topples. Inside the house, a damaged chimney can also open gaps that let fire and smoke reach the wood framing the next time the fireplace is used.

Look for cracks in the mortar near the roofline, loose or missing bricks, a chimney that leans away from the house, and gaps between the chimney and the wall. Any of these is a reason to stop using the fireplace and have the chimney evaluated.

Cap at the Roofline

The chimney is removed down to the roof and the opening is closed. It costs the least and removes the most dangerous part, but the fireplace can no longer be used.

Rebuild With a Metal Flue

The masonry comes down to a sound point, often the top of the firebox, and the chimney is rebuilt as a light wood-framed chase with a factory-built metal flue inside.

Full Removal

The entire chimney and firebox come out. It frees up floor and wall space, and it can be paired with a factory-built fireplace or none at all.

Permits for Chimney Work in Los Angeles

Chimney removal and reconstruction need a building permit. LADBS has a dedicated information bulletin for repairing damaged chimneys, P/BC 2023-070, which describes two standard methods. In the first, the chimney is rebuilt with a factory-built metal chimney over the remaining masonry, capped with a concrete bond beam, and the permit can be issued without plan check. In the second, the damaged firebox and chimney are replaced with a new masonry firebox and a metal chimney, and the work goes through plan check.

The bulletin also sets a firm limit. A damaged masonry chimney can’t be rebuilt in masonry unless it is completely removed first, and rebuilding in masonry requires structural plans and calculations by a licensed engineer or architect. Planned removal before an earthquake follows similar paths, but the details depend on how much comes out and what the roof and floor framing need afterward, so we confirm the permit route for your house before the design starts.

Brick chimney being removed at the roofline with scaffolding and a debris chute

What the Design Covers

We survey the chimney, the firebox, and the framing around them and decide with you how much comes out. The drawings cover the new roof and ceiling framing where the chimney passed through, the bond beam and its anchorage where masonry stays, the chase and the flue or fireplace unit where a new chimney goes in, and the firestopping between the new chimney and the house. If the chimney sits on its own footing in the crawl space, the plans show what happens to it. A licensed contractor builds the work from our approved plans.

A chimney is a good thing to address together with a seismic retrofit. Bolting the house and bracing the cripple walls keeps the house on its foundation, but it does nothing for a chimney on the roof. The Earthquake Brace + Bolt program helps pay for the bolting and bracing, and chimney work is outside its funded scope. Our guide to the EBB program explains what it does cover.

Removing a Chimney During a Remodel

Many homeowners decide to remove the chimney when they are already remodeling. Taking it out can open up a living room wall, make space for a kitchen layout that wasn’t possible before, or clear the way for an attic conversion or a second story. When the chimney is part of a larger project, it goes into the same design and the same permit. Our remodeling team plans it with the rest of the house, and if you are unsure how sound the masonry is, a structural inspection answers that first.

Frequently Asked Questions (FAQ)

  • Is my brick chimney dangerous in an earthquake?
    Older unreinforced brick chimneys are among the most earthquake-vulnerable parts of a wood-frame house. If yours has cracked mortar, loose bricks, or a lean, or if it was built before modern codes, have it evaluated before relying on it.
  • Do I need a permit to remove a chimney in Los Angeles?
    Yes. Removing or rebuilding a chimney affects the roof, the framing, and fire safety, so it needs a building permit. Some standard repair methods can be permitted without plan check, while others, and anything rebuilt in masonry, go through plan check with engineered drawings.
  • Can I keep using my fireplace after the chimney is removed?
    Yes, if the chimney is rebuilt with a factory-built metal flue in a light-frame chase, or if a factory-built fireplace or insert replaces the old firebox. Capping the chimney at the roofline means the fireplace can no longer be used.
  • Can an old brick chimney be reinforced instead of removed?
    Bringing an older unreinforced chimney up to modern seismic standards is generally not practical. FEMA’s guidance after the 2014 South Napa earthquake recommends partial or complete removal and reconstruction with a metal flue and light framing instead.
  • Does the Earthquake Brace + Bolt program pay for chimney work?
    No. EBB helps pay for bolting the house to its foundation and bracing cripple walls. Chimney removal or replacement is a separate project, though it can be designed and permitted at the same time.
  • Does YD Group remove the chimney?
    We design the removal and the replacement and handle the permit, and we support the contractor during construction. The work itself is done by a licensed contractor you hire, working from our approved plans.

Deal With the Chimney Before the Next Earthquake Does

Send us photos of the chimney from the street, from the roof if you can, and of the fireplace inside. We’ll tell you which option fits your house and what the permit will involve. Serving homeowners across Los Angeles County.

Book Your Consultation

Book a Free Consultation with Our Architects

Let’s discuss your goals and see if we’re a good fit for your project.

Experienced Design and Engineering Professionals

Meet Our Team

Yakov Zaryadnov

Co-Founder / CEO
YD Group architecture and engineering team, Los Angeles (view 5)

Roman Oleinikov

Co-Founder / Project Manager

Alena Ovsyankina

Architectural Designer

Tatyana Myasnova

Architectural Designer

Over 300 happy clients

Company reviews

Posted on Google Google
Alexander Artemchuk profile picture
Alexander Artemchuk
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Yakov exceeded our expectations in every way. From the initial consultation to the final reveal, their professionalism, creativity, and attention to detail were impeccable. The team took the time to understand our vision and brought it to life with innovative design solutions and high-quality craftsmanship. Communication was seamless throughout the project, and any concerns were addressed promptly. We are thrilled with the results and highly recommend Yakov Design Company for anyone seeking top-notch design service!
Posted on Google Google
Roman Maklakov profile picture
Roman Maklakov
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great guys! Made my design and construction plan without a problem! Yakov is a professional! The other designer Roma is good as well.
Posted on Google Google
Slava Litvin profile picture
Slava Litvin
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I've gotta say, working with Yakov Design to plan and design an ADU for my Playa Del Rey home was a fantastic experience! These guys are the real deal. From the get-go, Yakov and his team were super friendly and professional. They listened to what I wanted and took it to the next level. They were always there to answer my questions and made sure I was happy every step of the way. I'm not much of a design expert, but Yakov Design made the whole process a breeze. They kept me in the loop and even made some suggestions that turned out to be great additions to my project. The final result? My new ADU is amazing, and I can't thank Yakov Design enough. They've added so much value to my property and made my home even better than before. So, if you're looking for a design team that knows their stuff and treats you like a VIP, give Yakov Design a call. I'm super grateful for their help and will definitely use them again in the future. Thanks again, Yakov Design, you guys rock!
Posted on Google Google
Daniel Gonzalez-Gomez profile picture
Daniel Gonzalez-Gomez
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Articulate in translating his tasteful design language into something everyone can understand. We were beyond satisfied with Yakov’s work.

Get a free consultation

Let’s discuss your goals and see if we’re a good fit for your project.